The maximum output power of this device is 120 volt-amps and it has three sweep, pulse and continuous modes. The frequency of the RF current in continuous and intermittent modes can be adjusted to 350, 448, 680, 900 and 1100 kHz.
560G has 33 treatment programs, for each of which additional explanations, as well as images of the treatment area, are provided. The use of a 10-inch color touch screen, as well as the optimal design of the user interface, has provided ease of use and greater user satisfaction.
About Tecar 560G modality
Transfer Energy Capacitive and Resistive (TECAR) therapy is a new and advanced treatment method in physiotherapy, which has recently entered the fields of sports medicine and the improvement of skeletal-muscular problems. This therapeutic modality has been able to create great success in the field of physiotherapy by non-invasively treating bone, joint, soft tissue and other patients’ injuries. In general, weaving is one of the thermotherapy methods used to produce deep heat inside the tissue. In this way, an alternating current in the RF frequency range is applied by two electrodes on the skin surface. This device creates deep heat and cures spasms, reduces pain, and restores damaged tissues. Also, this heat increases the amount of blood supply and thus oxygen and nutrients to the tissue, which will ultimately increase cell metabolism, speed up the tissue healing process, and relieve pain.
Tecar 560G Therapeutic applications
The Takkar device transmits energy to body tissues by producing radiofrequency waves. Tissue-forming cells contain negative and positive ions. When a DC current is applied to the cell, the negative ions move towards the positive pole and the positive ions move towards the negative pole and remain there until the end of the stimulation. But if the polarity of the current is alternately changed with a high frequency in the RF range, the ions move back and forth between the electrodes at a high speed, which is called ion turbulence. The kinetic energy resulting from this rapid ion movement will cause heat production in the tissue. The heat created in the tissue immediately reduces the pain; As blood vessels expand, blood circulation increases; Contractions are reduced and the absorption power of the lymphatic system increases.
- the pain
- Rheumatology
- Improve movement
- Trauma and injuries
- Acute and chronic disorders
- Sports medicine and prevention of sports injuries
Tecar 560G GUI
It has a special, multi-frequency Sweep mode that provides the therapist with the possibility of simultaneous treatment in superficial and deep areas.The feedback diagram of heat transfer to the patient’s body on the device allows the therapist to continuously check the amount of heat transferred to the patient’s body during the treatment.The right angle of the device display makes it easy for the therapist to use. So that the therapist can master the device in both standing and sitting positions without changing the color and transparency of the display and easily apply the necessary settings…
- Predefined, accurate and effective treatment protocols based on valid scientific articles
- Additional information including the number of treatment sessions, intervals of treatment sessions, series size and guide images for the exact location of the handpieces
- Guide pictures for positioning the exact location of the handpiece and showing the patient's position during treatment
- A library of anatomy images of different parts of the upper and lower limbs
- Providing a wide range of device applications to facilitate communication between the therapist and the patient
- The ergonomics of handpieces and the facilitation of the possibility of manual therapy during takar therapy with the possibility of combining manual therapy and therapeutic exercises with takar.
Tecar 560G benefits
It has a non-thermal effect at low powers to treat pathologies sensitive to high temperature.
The graphic screen with high resolution and the use of capacitive touch technology provide ease of use.
It has a pulse mode with the ability to adjust the on and off time of the radio frequency current in order to control the temperature of the treated tissue.
For ease of use in the Grand series, it is possible to update the software of the device through the USB port and also connect to Wi-Fi.
| Technical Specifications | 350- 448- 680- 900- 1100 |
|---|---|
| power | 350 |
| Therapeutic mods | Continuous Pulsed Sweep |
| Number of treatment programs | 33 |
| Display | Full color, multi-touch, 10-inch screen |
| weight (kg) | Without trolley 4.6 with a trolley about 16.8 |
Tecar 560G handpiece
- Tekkar model 560G device uses three techniques Monopolar, Bipolar and Handsfree to apply RF electric current. In the Monopolar technique, one electrode, which is relatively smaller compared to the other electrode and is called the active electrode, is placed in the treatment area, and the other electrode, which is a relatively larger plate electrode and is called the passive electrode, is placed in an area usually a little further away.
- It is placed from the position of treatment. In the Bipolar technique, two small electrodes are placed in the treatment area at a very small distance from each other, thus the electric current moves from one electrode to the other electrode from a path inside the tissue until the current path is closed. Tekkar 560G uses two bipolar handpieces. The flat bipolar handpiece is used to apply radiofrequency current in small areas where it is not possible to place a metal plate.
- Eye bipolar handpiece is specially designed for small and sensitive areas around the eyes. In the Handsfree technique, self-adhesive electrodes replace the handpiece and the metal plate electrode, which, due to the strong connection to the patient's body, facilitates the combination of treatment with manual therapy and exercise therapy.
Standard Accessories
Optional Accessories
Reviews
There are no reviews yet.